The overall lifting guardrail device of the lifting cargo elevator has good strength, and the mobile lifting cargo elevator greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled through one lifting. It has strong load-bearing capacity and is suitable for two people to climb high at the same time. It can also be customized into various non-standard products according to different environments. Double track and double cylinder cargo elevator: double sets of guide rails, one left and right oil cylinder, suitable for lifting large tonnage goods, The load capacity can reach up to 30 tons, and the oversized table can be designed into four oil cylinders. The chain and steel wire rope have dual safety, achieving the advantages of safe use and long service life

升降货梯整体升降式护栏装置，强度好，移动式升降货梯运输时大幅度地降低整机高度，装卸十分方便，通过一次升降即可完成装配或拆卸，承载能力强，适合于两人同时登高作业，还可根据不同环境订制成各种非标产品，以满足不同需要。

The overall lifting guardrail device of the lifting cargo elevator has good strength. When transporting the mobile lifting cargo elevator, the height of the entire machine is greatly reduced, and the loading and unloading is very convenient. It can be assembled or disassembled with one lifting, with strong load-bearing capacity. It is suitable for two people to work at the same time. Various non-standard products can also be customized according to different environments to meet different needs.

用起重机吊起吊笼，从标准节上方使吊笼准确就位;将两吊笼分别套在导轨架上，并缓缓放置于缓冲弹簧上。将两个吊笼的驱动架准备好，将各背轮及滚轮调整极大间隙的位置，以利于安装驱动架。用起重设备再给升降货梯基本部分安装一个标准节，拧紧联接螺栓。用起重设备分别将两套驱动架安装在各自的吊笼上方并穿好联接销轴，将笼顶护栏安装好。

Use a crane to lift the lifting cage and accurately position it from above the standard section; Place the two suspension cages on the guide rail frame and slowly place them on the buffer spring. Prepare the drive frames of the two suspension cages and adjust each back wheel and roller to a position with maximum clearance to facilitate the installation of the drive frame. Install a standard section on the basic part of the elevator using lifting equipment and tighten the connecting bolts. Use lifting equipment to install two sets of drive frames above each suspension cage and thread the connecting pins, and install the cage top guardrail.

本文由山东升降货梯厂家提供帮助，更多的相关内容请点击http://crrpsc.cn希望本文能够为您带来帮助，感谢您的阅读！

This article is provided by Shandong elevator manufacturers for assistance. For more related content, please click http://crrpsc.cn I hope this article can be helpful to you. Thank you for reading!